synergy

Discussion in 'Compatible Equipment' started by Frank Lavallee, Jan 25, 2014.

  1. Frank Lavallee

    Frank Lavallee New Member

    I have had excellent results with all my Emotiva gear connected with Mikes MA-3 interconnects. also own a pair of SP-3 speaker cables. I am very happy with the results.
  2. Tenacity

    Tenacity Member

    It wasn't until I tried the DIG4 that I realised there was much more music to come out of my system, especially when I tried putting back the old cable, soon swopped back to the DIG4. When a cable performs like this I can't imagine it would not synergise with most makes ;) but it might show its shortcomings mmm o_O
  3. Lewis Smith

    Lewis Smith Guest

    How much of difference did you hear with the ma3's and I have audioquest and thinking about ma3's
  4. Frank Lavallee

    Frank Lavallee New Member

    Too my ears there was enough to justify the extra money spent. I have owned some Audioquest cables myself and think they are good cables. I like the flexibility and the lightness of mikes cables. you'll have to decide for yourself. I own about 6 pairs or more of the MA-3 interconnects. a couple pair of the MA-1 interconnects. I am sold on his audio cables.
  5. Lewis Smith

    Lewis Smith Guest

    Just got my sp1's and I'm very impressed so looks like my next step is made. Thank You!
  6. Samuel Bruce

    Samuel Bruce New Member

    Hi Lewis,

    Audioquest are good cables but the difference between the two design (Audioquest vs. Morrow) philosophies and their sound is fairly obvious. By comparison in my system the Morrow cables (MA5 vs Audioquest King Cobra) had more air, better sound stage and better and more well defined bottom end. This is not to say that the Audioquest did not have its own good point. The Audioquest had a very smooth midrange but in the end I was convinced that the music sounded fuller, more detailed and more spacious with the morrow cables vs. the Audioquest. I also borrowed an relatively expensive set of Audioquest cables with the 72 volt dielectric charger and found that even with the very significant price increase the Morrow MA5 as well as the MA3 and MA2 which build in strength but all have relatively the same sound focused on clarity, detail and air.

    Hope this helps a bit. My system is Levinson No 23.5, Coda fet01 preamp and speakers from Adam Tensor Delta. Sources are LP (VPI/Grado) and digital from Wadia.

    Sam
  7. Ernie Adams

    Ernie Adams Well-Known Member

    Emotiva gear with Morrow cables I'd a no brainer. Emotiva puts out products that are way above their price point in quality. The same goes for the Morrow cables. Bang for the buck, you can't go wrong with this combo. Especially the Emotiva ERC-3 and Morrow MA5's.
  8. Lewis Smith

    Lewis Smith Guest

    My Thanks to Mike Morrow and his Staff for this Forum and the people on it. I have gotten some great info and idea's. My Hats off to Morrow Audio! And mike I will be calling you soon the SP1's are sounding great with Rickie Lee Jones !!!!!!!
  9. Tenacity

    Tenacity Member

    This forum is now declared a nuisance cos its making me really impatient for the delivery of my SP5's. Well they say patience is a virtue so I'll go polish me haloo_O
  10. Lewis Smith

    Lewis Smith Guest

    it will be OK good things come to those who are patience!!!
  11. Tenacity

    Tenacity Member

    Y
    Yeh but my names Trevor not patience o_O Doh
  12. IkoX2

    IkoX2 New Member

    Does anyone have experience of Morrow cables with Rega Mira?
  13. Tenacity

    Tenacity Member

    I don't have the experience but from what I have read and experienced I think all that Morrow cables will do for you is let the Mira shine in it's abilities ;)
  14. DomP

    DomP New Member

    I have had a great experience with MA-3 balanced IC's and Bryston amplifiers. Seems to be a match made in Heaven. Every aspect of the sound improved after I switched from my previous single ended IC's.
  15. Bjski

    Bjski Member

    I'm using Morrow cables on all my Bryston equipment. MA5 RCA interconnects are going from my BDA-2 to my
    BHA-1. MA6 balanced for the rest of my Bryston system along with a DIG4 AES. Morrow SP7 bi-wired from the Bryston amps to my speakers.

    Home theater I'm using a Bryston 9BSST/2. Morrow MA4 balanced are used to connect to my processor.

    Prior to switching to Morrow cable I was using Bryston cabling. Noticed a Hugh improvement going from the Bryston cables to Morrow MA4.
  16. IkoX2

    IkoX2 New Member

    After exploring the site, I've made the purchase. Now for the patience of Job while they burn in...
  17. Ernie Adams

    Ernie Adams Well-Known Member

    Patience is hard to come by. My PH6's were shipped on Tuesday. Damn Atlanta snow put a delay in arrival. Still not here today. DAMN!!!!
  18. IkoX2

    IkoX2 New Member

    I bet it was horrible in ATL this week. I was stuck in a blizzard in Toronto back in the early eighties. My 20 minute drive took 4.5 hours. It sounded a lot worse for you guys. It sounds like it was the ice more so than the snow. Ice ANYWHERE is a major issue.
  19. Ernie Adams

    Ernie Adams Well-Known Member

    Not really much ice. Just idiots that don't know how to drive in snow and ice. I grew up in Maine, and this really should not have been such a big problem.
  20. Ernie Adams

    Ernie Adams Well-Known Member

    Did you get your cables yet?

Share This Page